Exclusive Lighitng  
 
[ Home ] [ Up ] [ Catalog ] [ Terms & Conds ] [ Search ] [ View Basket ] [ Checkout  ] [ Contact Us ] [ Site Map ] 

Store Sections



Best Sellers

  1. Vela Wall Light Model ST161/SAX
  2. Wexford Model No. WX2/ ELS
  3. Model No. 1120-3CH/ END
Left tabGap LightingRight tab

Gap Lighting

exclusive lighitng | LED Lighting |  Gap Lighting

LED 5050 GU10 Model No. L-SMD5050/ GAPLED 5050 GU10 Model No. L-SMD5050/ GAP
SMD (surface mounted design) LED is an excellent Replacement for halogens. The SMD5050 is a directly replacement for a 50w halogn lamp, but instead of using 50w you will only be using 4w. Ideal for any GU10 fitting; downlights, spots etc... Cooler running temperature will extend life of both lampholder and fitting.
Available in Warmwhite and Daylight colours

Price: £18.00 (Excluding VAT at 20%)


options

Colour



LED 60 SMD Model No. L-SMD/ GAPLED 60 SMD Model No. L-SMD/ GAP
The SMD is a new and revolutionary lamp, which replaces the old halpgen fittings. Our SMD is equivalent to a 35w standard halogen, but only uses 3.5w. It also has a beam angle of 120 degree instead of 36, giving you a much better spread of light. Can get in GU10 and L/V caps.
Available in warm white, coolwhite and daylight.

Price: £14.40 (Excluding VAT at 20%)

options



Dimmable SMD Model No. L-DIM-SMD/ GAPDimmable SMD Model No. L-DIM-SMD/ GAP
The dimmable SMD has all the same qualities as our standard smd, but can also be dimmed. This makes it perfect for creating the right lighting for you. Equivalent to a 35w halogen with a beam angle of 120 degrees makes this an excellent replacement.
Available in Warmwhite and Daylight

Price: £19.20 (Excluding VAT at 20%)


options

Colour



Model No. L-3X1/ GAPModel No. L-3X1/ GAP



Price: £14.40 (Excluding VAT at 20%)

colour



LED Colour Changing Strip/ GAPLED Colour Changing Strip/ GAP
RGB colour changing flexible strip with self adhesive backing. Ideal for fast installation into many applications including signs, displays, pelmets, under cabinets mood lighting restaurants, bars, clubs etc...
Single RGB LED chip allows eleven remote controlled settings including static red, blue, purple, green, yellow, cyan and white; gradual colour change. Four mode cycle (multi-colour changing, 7 colour skip, 7 colour flashing) with variable speeds.
Would require controller and driver, which follow below


Lengths

Lengths



High Spec RGB Strip Controller Model No. T-4000-RGB/ GAPHigh Spec RGB Strip Controller Model No. T-4000-RGB/ GAP
High Spec LED RGB Controller with 4000 colour change capilities. Remote has 7 different functions and you can create settings and save them into the controllers 5 channels. When on fade mode you can pause the controller to any colour you want and the controller has the memory to store the last setting before being turnt on. Controller requires a LED Driver.

Price: £115.00 (Excluding VAT at 20%)

Dimmable RGB LED Strip Controller Model No. T-DIM-CONTROLLER-RGB/ GAPDimmable RGB LED Strip Controller Model No. T-DIM-CONTROLLER-RGB/ GAP
Our LED Dimmable Controller allows you to have the same functions as the standard controller, but also gives you dimming facilities. It has 21 functions, with 7 different colour changes, with varied speed but you can also dim the strip to the brightness you want. Great for creating the perfect modd lighting.
Requires LED Driver

Price: £48.00 (Excluding VAT at 20%)

LED RGB Controller Model No. T-CONTROLLER-RGB/ GAPLED RGB Controller Model No. T-CONTROLLER-RGB/ GAP
Specially designed to work with our colour changing LED Strip, this controller has 11 functions with 7 different colours and 4 colour changing programs. You can set remote to fade, flash, change colour individually etc...
Each program can be varied in speed.
Controller requires LED Driver.

Price: £43.00 (Excluding VAT at 20%)

Indoor Led Strip/ GAPIndoor Led Strip/ GAP
Indoor LED strip, very bright! 30 LED's every 0.5 metres, can be cut every 3 LED's if you need to shorten strip. Ideal for under cabinets, displays, bars, dolls houses etc... Requires 12v DC driver (Two models :- 9 watt can run a length up to 1.85 metres and 30 watt up to 6 metres) and can also run from a 12v battery! You order by the unit which = half a metre of strip, therefore ten units = 5 metres, which is the longest continuous run recommended. Just solder on cables and connect to a 12v supply. Strong 3M adhesive backing will stick to most clean and dry surfaces. One metre uses only 4.8 watts of power! A very cool product. Please contact us for further information. (Available in white and blue).

colour
Length



Outdoor LED Strip/ GAPOutdoor LED Strip/ GAP
IP65 Outdoor LED strip, 48 LED's per metre. Ideal for bathrooms, displays - indoors or out, bars, signs, hot tubs! Plug in connectors included to keep weatherproof and to allow extending. Simply peel off backing and stick to clean, dry surface using strong 3M adhesive tape. Requires 12V DC driver - there are two types, a 9 watt which will run up to 2.35 metres, and a 30 watt, which can power up to 7.5 metres. You can cut to size, and seal with a drop of glue!
Sold in 1 metre strips which use only 3.8 watts!
(Available in blue & white)

colour
length



Single Colour Dimmable Control Model No. T-DIMMER-STRIP/ GAPSingle Colour Dimmable Control Model No. T-DIMMER-STRIP/ GAP
LED Single Colour Dimmable controller is idea for our strip. Its allows you to vary the brightness of strip with a simple press of a button. Controller has a memory setting so when switch off and on it remains of the same setting.
Controller requires a LED Driver

Price: £36.00 (Excluding VAT at 20%)

LED Strip Driver/ GAPLED Strip Driver/ GAP
LED Driver for LED strip.
Drivers comes in a variety of wattages, 30w, 50w, 60, 100w, 150w, 250. Depending on the amount of Led strip you require, will depend on the driver you need. Our indoor LED strip is 4.8w per metre so for e.g. a 30w driver could run 6 metres of indoor strip.... Our outdoor and colour changing strip is brighter and is 7.2w per metre so a 30w driver would only run 4 metres of strip.

If you have any enquiries please feel free to contact us.


options

Wattage



Maxi Kit Model No. LED-MAXI-KIT/ GAPMaxi Kit Model No. LED-MAXI-KIT/ GAP
High quality, stainless steel recessed lights, suitable for both indoor and outdoor use. Perfect for plinth lighting in kitch and bathrooms, also for in decking etc...
Kit comes complete with led units, junction box and led driver.
Available in Blue and White
Dimensions: Width 45mm, Depth 30mm, Cut out 32mm

Price: £48.00 (Excluding VAT at 20%)


options

Colour



Midi Kit Model No. LED-MIDI-KIT/ GAPMidi Kit Model No. LED-MIDI-KIT/ GAP
A very versatile and high quality chrome LED recessed fitting. With its contemporary polished chrome finish, makes it ideal for kitchen, bathroom and outdoors (IP44 Rating).
Kit is available in Round and Square, Blue and White.
Come complete with 10 LED units, junction box and LED Driver
Dimensions: Dia 30mm, Depth 27mm, Cut out 22mm

Price: £33.60 (Excluding VAT at 20%)


options

Fitting



Mini Kit Model No. LED-MINI-KIT/ GAPMini Kit Model No. LED-MINI-KIT/ GAP
The LED mini is ideal for pliinth lighting around the kitchen, bathroom, stairways and outdoor uses. It have a modern polished chrome finish and is available in Round/Square and Blue/White.
Kit comes complete with 10 x units, Junction box and LED Driver
Dimensions: Dia 15mm, Depth, Cut out 12mm

Price: £33.60 (Excluding VAT at 20%)


options

Fitting



LED Ground Light/ GAPLED Ground Light/ GAP
Low profile groundlight with 1w high power LED. 45 degree beam angle, stainless steel (316) IP68 5mm toughened walkover glass with 3m rubber cable. Sealed for life
cut out 58 x 39mm High Powered 1w Luxeon LED
Must be wired in series, Requires an LED driver 350ma.
Max. Temp. of circuit board: 70 degrees
Submersible to a depth of 2m
(Available in white and blue).

Price: £21.00 (Excluding VAT at 20%)

colour



350ma Driver Model No. TD-350ma DRIVER/ GAP350ma Driver Model No. TD-350ma DRIVER/ GAP
350ma driver, required to power G-16 led ground light. Wire in series. Can power 9 units.

Price: £9.60 (Excluding VAT at 20%)

LED Mini Recessed Light/ GAPLED Mini Recessed Light/ GAP
LED mini recessed light IP67 rated. Small groundwith 4 radial colour LED's, stainless steel (316) 5mm toughened frosted walkover glass. 36mm diameter top, fits into 27-33mm hole, depth 62mm. (NB. cable exit at bottom 3m rubber cable attached). A 24v driver is required and can run ten units.
(Available in white and blue).

Price: £14.35 (Excluding VAT at 20%)

colour



24v Driver Model No. TD-24DRIVER/ GAP24v Driver Model No. TD-24DRIVER/ GAP
24v driver, required to power up to ten mini recessed lights - Model no. G-18. Wire in parallel.

Price: £9.60 (Excluding VAT at 20%)

LED GU10 Lamp/ GAPLED GU10 Lamp/ GAP
GU10 LED, 1.2w, 21 LED's, last up to 50, 000 hours. Very bright for a multi diode lamp. equivalent to previous 2.2w version. (Available in white (daylight), blue, yellow, red, green, warm white).

Price: £4.20 (Excluding VAT at 20%)

colour



LED Colour Changing Lamp Model No. L-G-LED-COL-CH/ GAPLED Colour Changing Lamp Model No. L-G-LED-COL-CH/ GAP
Colour changing LED GU10 240V lamp, 50mm dia, 70mm Length. You can have 16 different colours! static with the colour of your choice or colour changing, has 4 dimming levels and 4 programs.
(Controlled via remote, which is not absolutely neccessary as lamp colours can be changed using the light switch! Although recommended if you want full control :- dimming, lamps on the same circuit different colours, locking programs etc..) This lamp can be used in most downlights using the GU10 base in bedrooms, bathrooms , kitchen, lounges, and anywhere you want to create great mood lighting. We also offer a range of outdoor lighting that can house this lamp. Please contact us to discuss this exciting product!

Price: £33.60 (Excluding VAT at 20%)

Colour Changing Remote Model No. L-G-LED-COL-REM/ GAPColour Changing Remote Model No. L-G-LED-COL-REM/ GAP
Colour changing lamp remote. Handheld controller which allows you to change the modes/ settings of the lamp from anywhere in your room.

Price: £14.40 (Excluding VAT at 20%)

LED Head Torch Model No. LED-HEADTORCH/ GAPLED Head Torch Model No. LED-HEADTORCH/ GAP
1 LED Micro-Head Torch, splashproof, anti-shock switch, blister packed, complete with 3x AAA batteries.
Great for working in poor light conditions and being able to use both hands! For camping, electrical work, plumbing and much more!

Price: £8.35 (Excluding VAT at 20%)

Flashlight Model No. LED-TORCH/ GAPFlashlight Model No. LED-TORCH/ GAP
14 LED Mirco-Flashlight, waterproof, anit-shock switch, anti-shock non slip structure. Blister packed c/w 3x AAA batteries. Fun and compact powerful torch, very handy in the glove box, handbag, toolbox or loft.

Price: £5.95 (Excluding VAT at 20%)

exclusive lighitng | LED Lighting |  Gap Lighting

Exclusive Lighting - 63 Mayplace Road East, Bexleyheath, DA7 6EA - 01322 555 306

Cart Details
Items:
Value: