Exclusive Lighting LED Lighting

EXCLUSIVE LIGHTING > LED Lighting

LED Colour Changing Strip/ GAP

RGB colour changing flexible strip with self adhesive backing. Ideal for fast installation into many applications including signs, displays, pelmets, under cabinets mood lighting restaurants, bars, clubs etc...
Single RGB LED chip allows eleven remote controlled settings including static red, blue, purple, green, yellow, cyan and white; gradual colour change. Four mode cycle (multi-colour changing, 7 colour skip, 7 colour flashing) with variable speeds.
Would require controller and driver.

Accessories

T-CONTROLLER-RGB (£54.00)	T-DRIVER-50W (£30.00)

Lengths

1 Metre (£60.00)	5 Metres (£300.00)

Indoor Led Strip/ GAP

Indoor LED strip, very bright! 30 LED's every 0.5 metres, can be cut every 3 LED's if you need to shorten strip. Ideal for under cabinets, displays, bars, dolls houses etc... Requires 12v DC driver (Two models :- 9 watt can run a length up to 1.85 metres and 30 watt up to 6 metres) and can also run from a 12v battery! You order by the unit which = half a metre of strip, therefore ten units = 5 metres, which is the longest continuous run recommended. Just solder on cables and connect to a 12v supply. Strong 3M adhesive backing will stick to most clean and dry surfaces. One metre uses only 4.8 watts of power! A very cool product. Please contact us for further information. (Available in white and blue).

colour
Length

Outdoor LED Strip/ GAP

IP65 Outdoor LED strip, 48 LED's per metre. Ideal for bathrooms, displays - indoors or out, bars, signs, hot tubs! Plug in connectors included to keep weatherproof and to allow extending. Simply peel off backing and stick to clean, dry surface using strong 3M adhesive tape. Requires 12V DC driver - there are two types, a 9 watt which will run up to 2.35 metres, and a 30 watt, which can power up to 7.5 metres. You can cut to size, and seal with a drop of glue!
Sold in 1 metre strips which use only 3.8 watts!
(Available in blue & white)

colour
length

LED Ground Light/ GAP

Low profile groundlight with 1w high power LED. 45 degree beam angle, stainless steel (316) IP68 5mm toughened walkover glass with 3m rubber cable. Sealed for life
cut out 58 x 39mm High Powered 1w Luxeon LED
Must be wired in series, Requires an LED driver 350ma.
Max. Temp. of circuit board: 70 degrees
Submersible to a depth of 2m
(Available in white and blue).

Price: £35.00 (Excluding: VAT at 17.5%)

colour

LED Mini Recessed Light/ GAP

LED mini recessed light IP67 rated. Small groundwith 4 radial colour LED's, stainless steel (316) 5mm toughened frosted walkover glass. 36mm diameter top, fits into 27-33mm hole, depth 62mm. (NB. cable exit at bottom 3m rubber cable attached). A 24v driver is required and can run ten units.
(Available in white and blue).

Price: £23.90 (Excluding: VAT at 17.5%)

colour

LED GU10 Lamp

GU10 LED, 1.2w, 21 LED's, last up to 50, 000 hours. Very bright for a multi diode lamp. equivalent to previous 2.2w version. (Available in white (daylight), blue, yellow, red, green, warm white).

Price: £6.98 (Excluding: VAT at 17.5%)

colour

LED Colour Changing Lamp Model No. L-G-LED-COL-CH/ GAP

Colour changing LED GU10 240V lamp, 50mm dia, 70mm Length. You can have 16 different colours! static with the colour of your choice or colour changing, has 4 dimming levels and 4 programs.
(Controlled via remote, which is not absolutely neccessary as lamp colours can be changed using the light switch! Although recommended if you want full control :- dimming, lamps on the same circuit different colours, locking programs etc..) This lamp can be used in most downlights using the GU10 base in bedrooms, bathrooms , kitchen, lounges, and anywhere you want to create great mood lighting. We also offer a range of outdoor lighting that can house this lamp. Please contact us to discuss this exciting product!

Price: £38.00 (Excluding: VAT at 17.5%)

LED Head Torch Model No. LED-HEADTORCH/ GAP

1 LED Micro-Head Torch, splashproof, anti-shock switch, blister packed, complete with 3x AAA batteries.
Great for working in poor light conditions and being able to use both hands! For camping, electrical work, plumbing and much more!

Price: £13.90 (Excluding: VAT at 17.5%)

Flashlight Model No. LED-TORCH/ GAP

14 LED Mirco-Flashlight, waterproof, anit-shock switch, anti-shock non slip structure. Blister packed c/w 3x AAA batteries. Fun and compact powerful torch, very handy in the glove box, handbag, toolbox or loft.

Price: £9.95 (Excluding: VAT at 17.5%)

12V DC - 9 Watt Driver for LED Strip

12V DC 9 watt output, which will run up to 2.35 metres of the outdoor strip, and 1.85 metres of the indoor strip.
Connect to 110v or 240v mains supply, and wire 12volt to LED strip, ensuring the correct polarity (+ and -) just like a battery! The strip will be marked accordingly.

Price: £18.00 (Excluding: VAT at 17.5%)

12V DC - 30 watt Driver for LED strip

12V DC 30 watt output, which will run up to 7.85 metres of the outdoor strip, and 6.25 metres of the indoor strip. We recommend limiting each continuous run to 5 metres. You can still acheive much longer distances, just use more drivers and place the next strip where the previous one ends.
Connect to 110v or 240v mains supply, and wire 12volt to LED strip, ensuring the correct polarity (+ and -) just like a battery! The strip will be marked accordingly.

Price: £24.00 (Excluding: VAT at 17.5%)

350ma Driver Model No. TD-350ma DRIVER/ GAP

350ma driver, required to power G-16 led ground light. Wire in series. Can power 9 units.

Price: £16.00 (Excluding: VAT at 17.5%)

24v Driver Model No. TD-24DRIVER/ GAP

24v driver, required to power up to ten mini recessed lights - Model no. G-18. Wire in parallel.

Price: £16.00 (Excluding: VAT at 17.5%)

EXCLUSIVE LIGHTING > LED Lighting